Find experienced local fencing contractors in WA

A single section of fencing was incorrectly installed, (too high) allowing dirt to slide under fence into neighbour's yard.

The existing lattice screen has been damaged and I need new section of unpainted pine 50mm squares fitted with posts. 6.7m long 2.4m high. Also need the shade cloth at the back replaced

Need a spa pool picked up, heavy and cannot help on one end, in Stratton, relocate to Ashfield and must be lifted over a fence down a side gate

As per picture New aluminium gate with wood-look slats was fixed to old aluminium posts but one of the posts has no footing (just screwed to decking joists) Need post replaced, including a small concrete footing

To put up a new farm fence, 100m long. Have all the materials needed pine post and fencing wire. Easy access. flat ground.

Fence need to be fixed. Need to join the broken metal part.

Remove existing 9 mt colorbond fencing with gate and replaced with new

Install approx 10m of colorbond fence and a pedestrian gate. Fence has been started just don't have time to finish. This is not a boundary fence, it's internal fence dividing the main house and a granny flat. Everything is ready to go onsite. Located in Rockingham

I have a 10 year old steel gate. It has screw holes in it that need to be bogged and sanded professionally and the whole gate painted. Also there is a gap between the gate door and side panel. Is there a way to adjust the hinges to make the gap not as wide?

Hi There Our business is seeking installers in Perth area who can undertake installs on our behalf at client sites We have a job needing the fake boxwood 1m x 1m panels to be attached onto a fence for a client, they want it facing the street from behind the fence (internally), and you need to zip tie at around 12 points and cut using scissors or similar once at the top of the fence. Install of 17 panels, should be approx 5-7 hours depending how you work.

Need to replace/repair an old spring on a pool gate, and mount and secure perspex or similar around 2000 high by 2400 wide.

two fence panels (lysaght smartascreen panel and profile type in summer shade colour) need to be increased in height by 600mm for privacy reasons. Extension should be with fencing panels but would consider horizontal aluminum slats to achieve the same effect. widths are 1580 and 2490, both join brick walls either side so stability is not an issue.

We have an old gate that provides access to the rear garden from a street facing wall. It needs replacing and also needs to self-close as there is a pool in the backyard. See photos. Looking for a price to supply and install a suitable gate please.

There is gap in fence between my house and neighbors house. Want to fill it up to maintian privacy.

I had a dog eat through a very old wooden lattice on our side gate - I just need a handy person who can replace the wooden lattice please I understand the cost of materials/labour varies We are currently using jockey straps and wood boards to block the hole

Fence installation required. Ezi-Slat Stratco gate 1x double “barn gate” style. gates already assembled. Just need to be hung and posts concreted in.

Colourbond fence posts are loose getting blown over by the wind

Looking for someone to replace the gate latch post and refix the slat. Around 2 hours labour. More job for right person. Materials supplied

Need 7 pool fence panels and some posts picked up in Connolly 6027 and delivered to Bateman 6150, on Sunday March 3rd, after midday. Panel/post dimensions are in the photos, please look at these as some panels are over 3m long.